Lanier 5813 manual 191, Image Adjustment

If You Cannot Make Copies as You Want

Problem	Cause	Action
Letter parts and photo parts of	An original has screen letters	Adjust the Text/Photo Sensi-
an original are not separated	or low density letters.	tivity to a “Text” level. ⇒
correctly.		P.142 “Image Adjustment”.
	An original has a high con-	Adjust the Text/Photo Sensi-
	trast photo.	tivity to a “Photo” level. ⇒
		P.142 “Image Adjustment”.
	An original has a photo hav-
	ing a sequence of thin lines
	with regular thin spaces.
Color parts of an original are	The original image contains	Adjust the A.C.S. Sensitivity
copied in black in Auto Color	small or thin color parts.	to a “Full color” level. ⇒ P.142
Select mode.		“Image Adjustment”.
Non-color parts of an original	The machine might detect	Select Black & White mode. ⇒
are copied in color in Auto	some black and white screen	P.31 “Black & White copy
Color Select mode.	images (such as from newspa-	mode”.
	per) as a full color original.
		Adjust the A.C.S. Sensitivity
		to a “B&W” level. ⇒ P.142
		“Image Adjustment”.
A copy image is blurred.	The image density is too light.	Adjust the image density. ⇒
		P.28 “Adjusting Copy Image
		Density”.
	An improper kind of paper is	Load the right kind of paper
	loaded.	in the paper tray.

		Note
		❒ Copies might be blurred if
		you copy onto rough
		grain, coated, or damp pa-
		per.
	Toner is running out.	Add toner. ⇒ P.196 “D
		Changing The Toner Cartridge”.
In Margin Adjustment mode,	The margin is set too wide.	Set the narrow margin with
parts of the original image are		the user tools. ⇒ P.217 “Gener-
not copied.		al Features”.
In Repeat Image mode, the	An improper reproduction ra-	Select the proper reproduc-
original image is not copied	tio is selected.	tion ratio.
repeatedly.

If you cannot correct the problem by taking the above actions, please contact your service representative.

6

191