Lanier 5813 Open the bypass tray Insert the paper into the bypass tray, Press the Duplex Back key

Copying

❒You cannot use this function for OHP transparencies, translucent paper, ad- hesive labels and postcards.

❒Do not use copy paper that has been already copied onto by other machines.

❒If the copy paper is bent, correct it before placing paper in the bypass tray. If the bent is not corrected, a paper misfeed might occur.

A

2B

Open the bypass tray.

Insert the paper into the bypass tray.

Note

❒Make sure the front side (the side that has been copied onto) faces down.

❒Make sure that you place your original and the copy paper in the correct direction to achieve the results required. ⇒ P.49 “Copying onto the reverse side of paper”.

C D

E F

Press the [Normal], [Thick] or [Extra Thick] key.

Press the [Duplex Back] key.

Note

❒To copy onto custom size paper, press the [Custom Size] key and select or enter the size. For details, ⇒ P.45 “Copying onto custom size paper with the bypass tray”.

Press the [OK] key.

Adjust the paper guides to the paper size.

Note

❒Make sure that the paper guides match the paper size. If the paper guides are not adjusted to the paper size properly, paper might be skewed or a pa- per misfeed might occur.

G Place your originals, and then press the {Start} key.

50