Lanier 5813 manual Use and Storage of Supplies, Copy Paper, 233

Use and Storage of Supplies

Use and Storage of Supplies

Copy Paper

•Copy paper of the types or in the conditions listed below are not recommend- ed for this copier.

•Folded, curled, creased, or damaged paper

•Torn paper

•Perforated paper

•Paper with conductive or low electrical resistance coating such as carbon or silver coating

•Thermal paper, art paper

•Thin paper that has low stiffness

•Damp paper

•Wavy paper

•Stapled paper

•Never use ink-jet printer paper to prevent failure.

•Use a proper type OHP transparency and place it in the correct direction.

•Fan copy paper and OHP transparencies to get air between the sheets before loading.

•Do not touch copy paper if your fingers are wet or oily; finger prints may ap-

pear on the copy. 8

•Load paper with the copy side down in the paper trays. If copies are curled, try turning the copy paper over in the tray. If there is no improvement, change to copy paper with less curl.

•When copying on rough surface paper, the copy image may be light.

233