Copying

C Press the color on the image you wish to scan in with the editor pen.

2

Note

Point to an area of color with a radius of at least 5 mm.

To cancel the pointing, press the [Erase] key.

For details about this display, ⇒ P.154 “Designate Area Display”.

D Press the [OK] key.

Note

The color you have chosen is scanned in.

E Press the {Start} key.

Twin Color Mode

Two methods are available:

Color Copy

Reproduces black areas of the original in one selected color and areas in other colors using the second selected color.

Note

You can have colored areas copied in one of the following colors: Red, Green, Blue, Yellow, Cyan, Magenta, Yellow Green, Orange, Marine Blue, Beige, Pink, Purple and User Colors

You can have black parts copied in one of the following colors: Red, Green, Blue, Yellow, Cyan, Magenta, Yellow Green, Orange, Marine Blue, Beige, Pink, Purple and User Colors

Red & Black

Reproduces red areas of the original in red, and areas in other colors using black.

Note

You cannot change the color.

34

Page 50
Image 50
Lanier 5813 manual Twin Color Mode, Color Copy, Red & Black