Lanier 5813 manual 214

7

Changing the Machine's Settings

Menu	Description
Control Panel Off	The machine enters Energy Saver mode automatically after your job is
Level	finished.
	Three Energy Saver levels are available:
	•	Level 1
		The back light of the panel display goes off.
		Warm-up time: 0 seconds
	•	Level 2
		Power consumption is a 25% decrease compared to stand-by.
		Warm-up time: Approximately 170 seconds
	•	Level 3
		Power consumption is a 40% decrease compared to stand-by.
		Warm-up time: Approximately 260 seconds

	Note
	❒ Default: Level 1
System Reset Timer	The machine returns to its prioritized mode automatically a certain
(Printer Option Re-	time after your job is finished, after the selected time. The time can be
quired)	set from 10 to 990 seconds (in 10 seconds steps), or off.

	Note
	❒ Default: On (60 seconds)
Function Reset Timer	When Interleave Print is turned on and a print job comes along while
(Printer Option Re-	the machine is busy printing another job, this delay specifies how long
quired)	the machine will wait before switching to the priority print job.
	The time can be set from 10 to 990 seconds.

	Note
	❒ Default: On (60 seconds)
Tray Paper Size	Select the size of the copy paper set in the paper tray.
	Note
	❒ If the specified paper size differs from the size of paper actually set
	in the paper tray, a paper misfeed might occur because the paper
	size is not detected correctly.
	Reference
	For details, ⇒ P.235 “Mainframe”.
Paper Tray Priority	You can select the paper tray which will be selected as a default in the
	following conditions:
	• When the main power switch or operation switch is turned on.
	• When System Reset or Auto Reset mode is turned on.
	• When the {Clear Modes} key is pressed.
	• When the Auto Paper Select mode is not selected.

Note

❒Default: Tray 1

214