Lanier 5813 manual Copied onto. ⇒ P.49 Copying onto the reverse side of paper

Copying

❒Select one of the following settings or keys:

•[Normal]: normal paper, adhesive labels

•[Thick]: thick paper, post cards, translucent paper

•[Extra Thick]: Heavier than 157g/m2, 42 lb

•[OHP]: OHP transparencies

•[Duplex Back]: Copying onto the reverse side of paper that has been already

2 copied onto. ⇒ P.49 “Copying onto the reverse side of paper”.

•[Custom Size]: Custom sized paper. ⇒ P.45 “Copying onto custom size paper with the bypass tray”.

❒When you copy onto OHP transparencies, you can select whether a blank slip sheet is inserted between OHP transparencies.

❒When you set several sheets at a time, fan them to get air between them before loading.

❒If the copy paper is curled, gently roll it to remove the curl.

❒When you copy onto OHP transparencies, insert them with the copy side up.

❒Do not stack copy paper above the limit mark.

❒If the copy paper is bent, correct it before setting paper in the bypass tray. If the bent part is not corrected, a paper misfeed might occur.

❒When the optional sorter stapler is installed, copies made onto thick or OHP transparencies are not delivered in the proof tray but in the first bin instead.

❒When setting custom size paper, be sure to set the size after pressing the [Cus- tom Size] key.

Important

❒Do not set normal paper in the Extra Thick mode, otherwise a paper misfeed or other malfunction might occur.

42