Lanier 5813 manual If Your Machine Does not Operate as You Want, 187

6. Troubleshooting

If Your Machine Does not Operate as You Want

Check the following:

Condition	Action
Nothing happens when	Is the main power switch turned on?
the operation switch is	→ Turn on the main power switch.
turned on.
B Paper tray is empty.	Load paper. ⇒ P.192 “B Loading Paper”.
D Toner cartridge is al-	Add toner. ⇒ P.196 “D Changing The Toner Cartridge”.
most empty. Or toner con-
tainer is empty.
M Doors/covers are open.	Close the doors/covers.
x Misfeed occurs.	Remove misfed paper. ⇒ P.198 “x Clearing Misfeeds”.
d The machine instructs	Add staples. ⇒ P.201 “d Adding Staples”.
you to add staples.
The machine instructs you	The machine is set for User Code mode. Enter your user code. ⇒
to enter your user code.	P.217 “General Features”.
The Energy Saver indica-	Your machine is under the energy saver condition.
tor is on.	→ Press the {Energy Saver} key. ⇒ P.52 “Energy Saver Mode”.
Misfeeds occur frequently.	Is the right kind of paper in the paper tray?
	→ Paper size and weight must be within the specifications for this
	machine.
	Is folded, wrinkled, damp, or curled paper in the paper tray?
	→ Always use dry, undamaged paper.
	Is the paper properly set in the paper tray?
	→ Always load paper correctly.
	Are there any pieces of misfed paper or other foreign objects in the
	machine?
	→ Make sure that the paper path is completely clear of paper and
	other material after a misfeed.
Staples do not come out at	There are jammed staples in the stapler.
all.	→ Remove the jammed staples. ⇒ P.203 “eRemoving Jammed Sta-
	ples”.
	After loading a new staple cartridge, staples might not be ejected
	the first few times you try to use the stapler.
E or H or L is lit	Contact your service representative.

187