Safety Thermostat

To prevent dangerous overheating (through incorrect use of the appliance or defective components), the oven is fitted with a safety thermostat, which interrupts the power supply.The oven switches back on again automatically, when the temperature drops.

Shouldthesafetythermostattriggerduetoincorrect useoftheappliance,itisenoughtoremedytheerror aftertheovenhascooleddown;ifontheotherhand, the thermostat triggers because of a defective component, please contact Customer Service.

The cooling fan

The cooling fan is designed to cool the the oven and the control panel. The fan switches on automatically after a few minutes of cooking. Warm air is blown out through the aperture near the oven door handle. When the oven is switched off, the fan will remain on in order to cool the oven and kitchen cabinets properly, after which it switches off automatically.

Before using the oven for the first time

Remove all packaging, both inside and outside the oven, before using the oven.

Before using for the first time, the oven should be heated up without food.

During this time, an unpleasant odour may be emitted. This is absolutely normal. It is caused by manufacturing residues.

Ensure the room is well ventilated.

)1. Switch the oven function control knob to fan cooking .

2.Set the thermostat control knob to 250° C.

4.Open a window for ventilation.

5.Allow the oven to run empty for ap- proximately 45 minutes.

This procedure should be repeated with the full

grill function for approximately 5-10 minutes.

Then let the oven cool down. Then dampen a soft cloth with warm water and a little mild washing-up liquid and use this to clean the oven cavity.

Before using for the first time, carefully wash the oven accessories as well.

To open the oven door, always hold the handle in the centre.

7

Page 7
Image 7
Zanussi ZOB 330 manual Before using the oven for the first time, Safety Thermostat, Cooling fan