Electronic programmer
4
5
6
2 1 3
Fig. 4
1.Push button for selecting a function
2.Decreasing control button “ ”
73. Increasing control button “ ”
84. Display
5.“Cooking Duration” pilot lamp 
6.“End of cooking” pilot lamp
7.“Minute minder” pilot lamp
8.“Time of day” pilot lamp 
The oven will only work if the time of day has been set.
However, the oven can also be operated without any programme.
Setting the time of day 
When the power supply is switched on, or after a power failure, the “Time of day” pilot lamp 
will flash on the display.
To set the correct time of day:
1.Press button “
” or “ ”.
2.After the setting is carried out, wait for 5
seconds: the “Time of day” pilot lamp |
|
| will |
| |||
|
|
go out and the display will show the set time. The appliance is ready for use.
To reset the correct time of day:
1.Press button
repeatedly to select the “Time of day” function. The relevant pilot lamp will start flashing. Then proceed as described above.
The time of day can only be reset if no automatic
function (cooking duration 
or end of
cooking
) has been set.
In the event of a power failure, all the settings (time of day, programme setting or programme in operation) will be cancelled. When the power is restored, the numbers in the display will flash, and the clock/timer has to be reset.
8
