Zanussi ZOB 550 For UK use only, Letter L, Live terminal, Letter N, or E-Earth terminal, Min.size

Electrical Connection

Theovenisdesignedtobeconnectedto230V(50 Hz) electricitysupply.

The oven has an easily accessible terminal block which is marked as follows:

Letter L -	Live terminal
Letter N-	Neutral terminal

or E-Earth terminal

THIS OVEN MUST BE EARTHED

Thecableusedtoconnecttheoventotheelectrical supply must comply to the specifications given below.

For UK use only

It is necessary that you install a double pole switch betweentheovenandtheelectricitysupply(mains), with a minimum gap of 3mm between the switch contacts and of a type suitable for the required load in compliance with the current rules.

The switch must not break the yellow and green earth cable at any point.

the yellow and green earth cable should be 2-3 cm longer than the other cables.

Important

After installation and connecting, the cable must be placed so that it cannot at any point reach a temperature of more than 50°C above the ambient temperature.

Before the oven is connected, check that the main fuse and the domestic installation can support the load and that the power supply is properly earthed.

The manufacturer declines any responsibility should these safety measures not be carried out.

Connection	Min.size		Cable/flex		Fuse
via	Cable/flex		type
13 A socket	2.5 mm2		3 core		13 A min.
outlet			butyl
			insulated
13 A spur box
Oven	2.5 mm2		PVC/PVC		15 A min.
Control			twin and
Circuit			earth		20Amax.
For Europe use only
Min. size Cable/		Cable / flex type		Fuse
flex
2.5 mm2		H07 RN-F, H05 RN-F,		15 A
		H05 RR-F, H05 VV-F,
		H05 V2V2-F (T90),
		H05 BB-F

31