If the appliance is to be installed between two units with a matching furniture door/support panel, the door/panel must be fitted to the adjacent unit using suitable hinges (not supplied) before the appliance is installed.
UPPER | LOWER |
D326 |
|
1.Fasten the side panel to the rear of the appliance with the fixing brackets.
UPPER | LOWER |
E |
|
| E |
D319 |
|
2.Fasten the appliance to the worktop or the sides, applying the sealing strip between the refrigerator and adjacent cabinet using the fixing brackets (E).
30
S.I.006
3.The appliance is equipped with adjustable support feet. To adapt the appliance to the height of the installation area (max 870 mm), screw in, or screw out the feet situated at each bottom corner.
A
B
C
D
PR266
4.Separate parts A, B, C, D as shown in the figure.
50mm | A |
| 20mm |
PR166 |
|
5.Place guide (A) on the inside part of the furniture door, up and down as shown in the figure and mark the position of external holes. After having drilled holes, fix the guide with the screws sup- plied.
14
