Zanussi ZVR11R Maintenance and Cleaning, Normal Operating Sounds, Removing the ventilation grille

Normal Operating Sounds		being pumped round, and you will hear a
		whirring sound or pulsating noise from the
· You may hear faint gurgling or bubbling sounds
		compressor.
when the refrigerant is pumped through the coils	·	A thermostat controls	the compressor and you
or tubing at the rear, to the cooling
		will hear a faint "click" when the thermostat cuts
plate/evaporator.
		in and out.
· When the compressor is on, the refrigerant is
Maintenance and Cleaning			GB

Before any maintenance or cleaning work is carried out DISCONNECT the appliance from the ELECTRICITY supply

Removing the ventilation grille

The ventilation grille can be removed, e.g. to wash the grille.

Make sure the door is open when removing the ventilation grille. Unsnap the upper edge of the grille by pulling outward/downward. Then pull the grille straight out to completely remove it.

Internal Cleaning

Clean the inside and the accessories with warm water and bicarbonate of soda (5 ml to 0,5 litre of water).

Rinse and dry thoroughly.

Do not use detergents, abrasive powders, high perfumed cleaning products, wax polishes or cleaning products containing bleach or alcohol .

Regulary check the door seals and wipe clean to ensure they are clean and free from debris.

External Cleaning

Wash the outer cabinet with warm soapy water. Remove the ventilation grille (see the section "Removing the ventilation grille") and vacuum-clean under the cabinet. Once or twice a year dust the condenser (black grille) and the compressor at the back of the appliance, with a brush or vacuum cleaner, as an accumulation of dust will affect the performance of the appliance and cause excessive electricity consumption.

When moving the cabinet, lift it by the front edge to avoid scratching the floor.

Zanussi 818 15 02--02/5

8