Operating sequence
10. Select the Start/Pause
To start the selected programme, press the Start/Pause button; the corresponding green pilot light stops flashing.
Before you start the programme, if you wish to delay the start, press repeatedly the «Delay
Start» buttons 
and 
, to select the desired delay.
The selected delay time value (up to 20 hours)
Lock
Start/Pause
The «Lock» light illuminates to indicate that the appliance starts operating and the door is locked.
will appear on the display for about 3 seconds, then the duration of the programme will appear again.
You must select this option after you have set the programme and before you press the Start/Pause button.
The “Lock” light indicates if the door can be opened:
●light on: the door cannot be opened. The appliance is running.
●light off: the door can be opened. The washing programme is finished.
To interrupt a programme which is running, depress the Start/Pause button: the corresponding green pilot light starts to flash. To restart the programme from the point at which it was interrupted, press the Start/Pause button again.
If you have chosen a delayed start, the machine will begin the countdown.
IMPORTANT!
If an incorrect option is selected, the red pilot light of the Start/ Pause button flashes for 3 times and the message Err is displayed for about 2 seconds.
11. Select the Delay Start
Delay Start
90’
The wash programme can be delayed from 30 min - 60 min - 90 min, 2 hours and then by 1 hour up to a maximum of 20 hours by means of this button.
Selecting the delayed start:
●Select the programme and the required options.
●Select the delay start.
●Depress “Start/Pause” button: the machine starts its hourly countdown.
The programme will start after the selected delay has expired.
Cancelling the delayed start:
You can cancel the delay time at any moment, before you press the Start/Pause button.
If you have already pressed the Start/Pause button, and you wish to cancel the delay time, proceed as follows:
•set the washing machine to PAUSE by pressing the Start/Pause button;
•press the Delay Start buttons once until the symbol 0’ is displayed.
•press the Start/Pause button again to start the programme.
19
