Printer Installation

The QL 420 Printer can now be installed in the Mobile Mount. Secure the printer to the Mobile Mount Bracket with (4) #8-32 x 3/8” Screws, Lock Washers and Flat Washers. (See Figure 5). Plug the output voltage cable from the Mobile Charger into the bottom of QL 420 Printer. (Note: In some installations it may be easier to plug the charger cable into the printer prior to securing the Printer to the Mobile Mount.) If desired, you can use one of the supplied cable clamps and a #6-32 x 1/4” screw to hold the cable in position.

 

#8-32 x 3/8” Truss Hd. Screw

 

(p/n TH-SD1405)

 

#8 Lock Washer

 

(p/n TH-WB0708)

 

#8 Flat Washer

 

(p/n TH-WA0712)

Data I/O Cable

supplied with Mobile Mount Kit.

Charge cable from

RCLI-DC Charger

1/4-20 x 1/2” Bolt, supplied with Mobile Mount Kit (p/n TH-SK2007)

Fanfold Bin (p/n 52520)

Figure 5:

Printer Installation

AM16629-1 Rev. C

pg. 9 of 12