Zebra Technologies LP 2824 manual Replacing the Platen, Removal, Assembly

Replacing the Platen

Removal

MOVIE

Open the printer and remove any media.

1. Using a pointed stylus (such as tweezers, small slot-head screwdriver, or razor-knife), unhook the tabs on the right and left sides. Then rotate them forward.

2. Lift the platen out of the printer’s bottom frame.

Assembly
Make sure the right bearing is on the shaft
of the platen.
1.	Align the platen with the gear to the
	left and lower it into the printer’s
	bottom frame.
2.	Rotate the tabs back and snap them
	into place.
28	980481-001A