APPENDIX A - MAGNETIC CARD
STRIPE ENCODER
Operation and maintenance requirements for the P310 Printer with the optional magnetic card stripe encoder.
(See Chapter 2 for location).
The magnetic encoder can be set for either high or low coercivity.
STRIPE DOWN
STRIPE UP
The magnetic encoder is a factory installed item with the read/write head positioned below the card path, available with HICO encodingor LOCO encoding.
When loading cards into the Card Cartridge, please ensure the magnetic stripe is facing towards the printer and closest to the rear.
Also available are Printer models with the Magnetic Read/ Write head positioned above the card path, with HICO encoding or LOCO encoding.
When loading cards, please ensure the magnetic stripe.
Approved HICO & LICO PVC cards are available. (See Appendix C.)
SAMPLE ENCODING PROGRAM
Refer to Programmer's manual (Part number
ONLY USE cards that comply with ISO 7810 & 7811 standards for magnetic stripe cards. The magnetic stripe must be flush to the surface of the card to work properly. Never use
31 |