Zebra Technologies P310C user manual The ribbon will not synchronize on the P310F

SUPPLY SPINDLE

3. Load ribbon onto the supply spindle (under print head carriage) and empty core (with tape attached) onto the take-up spindle. Make sure the ribbon comes off of the top of the supply spindle and feeds to the top of the take-up spindle.

TAKE-UP SPINDLE

`CLICK'

4.Push down on the Print Head Lock Lever until an audible 'click' signals the locked-down position.

5.Close Cover.

Please note that the ribbon automatically synchronizes whenever the print head lock down occurs with the P310C only,

The ribbon will not synchronize on the P310F.

980261 -001 Rev. B 7