Zebra Technologies P310C, P310F user manual Cleaning The Print Head

CLEANING THE PRINT HEAD

A cleaning using the Cleaning Cards usually suffices. However, a seperate Print Head cleaning using swabs can remove more stubborn deposites when print anomalies persist. To avoid deposits, only use foam-tipped swabs.

1.Turn power OFF. Raise Print Head and remove the Ribbon.

2.Clean Print Head by moving alcohol- moistened swab tip side-to-side across Print Head elements. Only use moderate force. (To reorder swabs see Appendix C).

3.Turn power ON. Allow two minutes for the print head components to dry before resume printing.

Never use a sharp object to scrape deposites from the print head. Permanent damage will result.

980261-001 Rev. B 19