Zebra Technologies P4T manual Programmable LCD Settings

P4T/RP4T User Guide

Manual Introduction	RP4T Printers 35
pg.	pg.
4
P4T Overview- pg. 5	Maintenance pg. 36
Printer Preparation pg. 7	38	Troubleshooting pg.
Connecting the Printer pg. 27	43	Specifications pg.
Radio Regulatory Information pg. 31	Appendices pg. 46
	Index pg. 52

Programmable LCD Settings

In addition to the status icons, the LCD on the control panel can display many of the printer’s settings and functions as text as deter- mined by the printer’s application. Applications can be written to allow the user to view and /or modify these settings using the scroll and select keys on the display. Refer to the following tables for a partial set of printer features that can be programmed to display on the LCD.

The LCD has a backlighting option which allows viewing of the screen in a dark environment, or provides better contrast in a very bright environment. Use of the display backlight will decrease the time the printer will run between charges. Refer to the section “Extending Battery Life” for more information.

Extended LCD Functions

Function	Default setting	Scroll & Select Options
Sensor Type	Bar	• Bar
		• Gap
		• 9600
		• 19200
Baud Rate	19200	• 32400
		• 57600
		• 115200
Data Bits	8	• 7
		• 8
		• E (Even)
Parity	N (none)	• N (None)
		• O (Odd)
LCD Contrast	8	• Increase (15max.)
		• Decrease (15 max.)
No-activity Timeout	120 sec.	• Decrease (0 min.)2
		• Increase (120 max.)
		• 1 – Low
Audio Volume	3	• 2 – Medium
		• 3 - High
Media Type	Journal	• Journal
		• Label
LCD Backlight3	Momentary On	• Momentary On w/ time delay
		• Off
Factory Reset (Resets	No	• No
all to factory set
		• Yes
values)

NOTES:

1:LCD menu options are under specific application control. Not all options may be available In your printer’s application.

2:A No-activity timeout value of “0” means the printer will remain on until powered off by the operator.

3:LCD Backlight turns on when any key other than FEED is pressed.

Section Continues 23