Zebra Technologies P4T Series Cleaning, Mechanism, Tear Edge, Area Cleaning Method Interval

P4T/RP4T User Guide

P4T Series Cleaning

Manual Introduction	RP4TPrinters 35
			Caution • To avoid possible personal injury or damage to the printer never insert sharp or pointed objects into the printer
			mechanism.
pg.	pg.	Figure 17.1- P4T Series Cleaning
		Tear Edge
4

P4T Overview- pg. 5 Maintenance pg. 36

Printer Preparation pg. 7		Troubleshooting pg.	Gap Sensor
	38

Connecting the Printer pg. 27 Specifications pg. 43

RadioRegulatory Informationpg.31	Appendicespg.46	Figure 17.2- Cleaning the P4T Series Peeler Assembly
		Label Presence
		Sensor

Index pg. 52

Printhead

Elements

Media

Support Disks

Bar

Sensor

Peeler Bar

Platen Surface

Area	Cleaning Method	Interval
	Use the supplied cleaning pen to clean the print
PrintheadElements	elements from end to end (the print elements are	Aftereveryfiverollsofmedia(ormoreoften,
	located in the thin gray line on the printhead).
		if needed)
Platen Surface	Rotatetheplatenrollerandcleanitthoroughlywiththe
	cleaning pen.
Peeler Bar	Clean thoroughly with the cleaning pen.
Tear Edge
Exterior	Wipe with water-dampened cloth	As needed
Interior	Brush/airblow. EnsuretheBarSensor,GapSensorand
	LabelPresentSensorwindowsandtheMediaSupport
	Disks are free of dust.

37