P4T/RP4T Quick Start Guide
Introduction
Getting | Started |
|
Using | the | Printer |
|
Cleaning the Printer
Caution • To avoid possible personal injury or damage to the printer never insert sharp or pointed objects into the printer mechanism.
Tear Edge
| Printhead |
| Elements |
Gap |
|
Sensor | Media |
| |
| Support |
| Disks |
| Bar Sensor |
Troubleshooting
Label Presence Sensor
Platen Surface
Area | Cleaning Method | Interval |
Contact | Us |
|
Peeler Bar
Printhead | Use the supplied cleaning pen to clean the print | |
elements from end to end (the print elements are | ||
Elements | ||
located in the thin gray line on the printhead). | ||
| ||
Platen Surface | Rotate the platen roller and clean it thoroughly with | |
the cleaning pen. | ||
| ||
Peeler Bar | Clean thoroughly with the cleaning pen. | |
Tear Edge | ||
| ||
Exterior | Wipe with | |
Interior | Brush/air blow. Ensure the Bar Sensor, Gap Sensor | |
| and Label Present Sensor windows and the Media | |
| Support Disks are free of dust. | |
|
|
After every five rolls of media (or more often, if needed)
As needed
10
