Zenith S2898A, C27H26B, 206-3923 warranty TV operation, continued, Display, Quick View, Mute, Sleep

TV operation (continued)

NOTE:

After 10 seconds, DISPLAY screen will return to normal TV-operation automatically, when a Digital signal is received.

After 4 seconds, DISPLAY screen will return to normal TV-operation automatically, when an Analog signal is received.

CH /

Press and release CH or .

The channel automatically stops at the next channel set into memory.

For proper operation, before selecting channels, they should be set into the memory. See pages 14 - 16 “Memorizing channels”.

DISPLAY

Press –/DISPLAYto display the current information on the screen.

When the TV receives a digital signal, the digital information will appear.

•Broadcast program name

•Station name

•Audio language

•Program name

•V-CHIP RATING

When the TV receives an Analog signal, press –/DISPLAYagain, the analog information will appear.

• Clock

• Channel number or VIDEO mode selected

•Stereo or SAP (second audio program) audio status

•Picture size

Press –/DISPLAYagain to clear the call display.

QUICK VIEW

This button allows you to go back to the last channel selected by pressing QUICK VIEW. Press QUICK VIEW again to return to the last channel you were watching.

MUTE

Press MUTE to switch off the sound. The unit’s sound will be silenced and “MUTE” will appear on the screen.

The sound can be switched back on by pressing this button again or one of the VOL + or – buttons.

SLEEP

To set the unit to turn off after a preset amount

of time, press SLEEP on the remote control. The clock will count up 10 minutes for each

press of the SLEEP button (0, 10, 20, ...100, 110, 120).

After the sleep time is programmed, the display will appear briefly every ten minutes to remind you that the sleep timer is operating.

To confirm the sleep timer setting, press SLEEP and the remaining time will be displayed for a few seconds. To cancel the sleep timer, press SLEEP repeatedly until the display turns to 0.

18