Zenith S2898A, C27H26B Setting the V-Chip, continued, English, To change the password, Menu/Enter

Setting the V-Chip		(continued)
To change the password
1 Press MENU/ENTER. The menu screen appears.
2 Press or to select	(OPTION)
menu, then press or	to select
“V-CHIP”.

3 Press to display the password entering mode. Use the number buttons (0-9)to enter your password, then press MENU/ENTER.

The V-CHIP menu appears.

4 Press or to select “CHANGE PASSWORD”, then press .

5 Enter a new password using the number buttons (0-9), then press

MENU/ENTER.

6 Enter the same password again to confirm, then press MENU/ENTER.

7 Press MENU/ENTER repeatedly until the menu screen is cleared. Otherwise, press EXIT to return to the normal screen immediately.

ENGLISH

21