Xerox 4230/MRP, 4220/MRP manual Editing printer port redirection, Editing the fax printer password

Models: 4220/MRP 4219/MRP 4230/MRP

1 90
Download 90 pages 37.42 Kb
Page 54
Image 54
Editing printer port redirection

ADMINISTERING THE FAX SOFTWARE

4. Select Exit and press Enter.

Editing printer port redirection

Usually fax software captures data from, and sends data to, the same port. This is the port you specified as the printer port when you ran the install program. If needed, you can change this setting, so that the fax software captures data from a different port than the printer port.

Follow these steps to edit printer port redirection:

1.Choose Edit Printer Port Redirection from the Advanced Installation Options screen.

The Printer Port Redirection screen appears.

2. Select the port you want and press Enter.

NNote: If you edit Printer Port Redirection, you must make sure that all the MS-DOS software you want to fax from is set to output to the new capture port you select.

Editing the fax printer password

The fax password allows others with fax printers to send documents to your printer in PostScript format. The fax printer password can be up to 44 characters long.

Follow these steps to change your fax printer password:

1.Select Edit Fax Printer Password from the Advanced Installation Options screen.

3-8

XEROX MRP FAMILY FAX MODEM FOR MS-DOS OPERATOR GUIDE

Page 54
Image 54
Xerox 4230/MRP, 4220/MRP, 4219/MRP manual Editing printer port redirection, Editing the fax printer password