ADMINISTERING THE FAX SOFTWARE
2.Press Enter.
The Edit Timeout Settings screen appears.
Specifying the fax job start timeout
If you set the Fax
Follow these steps to change the fax start timeout:
1.On the Edit Timeout Settings screen, press the arrow keys to highlight the Fax Job Must Start Within field.
2.Type the number of seconds (0 to 999) that you want for timeout.
3.Press F10 to return to the Advanced Installation Options screen.
4.Select Exit and press Enter.
Specifying the fax job end timeout
If the printer stops receiving fax input for 20 seconds in the course of a job, it considers the job to be over. If you find that faxes that you send are being terminated prematurely, you may need to change this value to a higher number. This might happen if you are faxing from a graphics or database application that pauses to process more data while in the middle of printing.
NNote: If the printer is installed as a network printer, your Fax End Timeout setting must be less than your network timeout setting.
Follow these steps to change the fax end timeout:
1.Press the arrow keys to highlight the Fax Job Ends When Idle For field on the Edit Timeout Settings screen.
2.Type the number of seconds (from 0 to 999) that you want for the timeout.
3.Press F10 to return to the Advanced Installation Options screen.
XEROX MRP FAMILY FAX MODEM FOR |