Xerox 4230/MRP Changing the basic settings with the install program, Enabling the Fax Pop-up menu

ADMINISTERING THE FAX SOFTWARE

Changing the basic settings with the install program

1.Type C:\PSFAX\INSTALL at the MS-DOS prompt. (This assumes that you accepted the default directory during the original installation; otherwise, use the appropriate path name.)

2.Press Enter.

3.Continue pressing Enter to accept the current values and until you reach a screen you want to change.

4.Make the changes you want.

5.Press Enter until you return to the MS-DOS prompt.

You can change the basic settings with the install program whether the fax software is loaded or not. The change you make takes effect the next time you start the fax software. This occurs by either rebooting your computer or issuing the PSFAX LOAD command.

The following examples illustrate how to change the fax software basic settings.

Enabling the Fax Pop-up menu

If you did not enable the Fax Pop-up menu when you ran the install program, you can enable it by running the install program from your hard disk.

1.Continue with the install program until you get to the Pop-up Menu for MS-DOS Applications screen.

2.Select Enable Fax Pop-up menu for MS-DOS applications and press Enter.

3.Press Enter until the program exits to MS-DOS.

4.Do one of the following:

·If you use automatic loading, reboot the computer to load the fax software with the new settings.

or

·If you do not use automatic loading, reboot to unload the software and type \PSFAX\PSFAX from the MS-DOS prompt to load it your new settings.

Changing the hot-key combination example

This example shows you how to change the hot-key combination for displaying the Fax Pop-up menu.

1.Continue with the install program until you get to the Fax Pop-up Menu Hot Key Selection screen.

2.Press the new hot-key combination you want to use, then press Enter.

3.Press Enter until the program exits to MS-DOS.

3-2 XEROX MRP FAMILY FAX MODEM FOR MS-DOS OPERATOR GUIDE