Xerox 4230/MRP, 4220/MRP Receive Setup, Header, Ring Count, Input Tray, Automatic Tray Switching

FAX SETUP MENU

Header

The Header option enables or disables the printing of a header on the sent fax document. The factory default is on, Enable*.

Receive Setup

The Receive Setup options allow you to make changes to the settings which affect the incoming fax documents received at your printer. The Receive Setup options include:

·Ring Count

·Input Tray

·Automatic Tray Switching

·Output Destination.

Ring Count

The Ring Count option sets the number of rings the Fax Modem waits before answering the phone. The number of rings is entered as one or two digits (1 through 10). The factory default is 2*.

Input Tray

The Input Tray option determines the default input paper tray or trays to be utilized for a fax received.

Settings include:

·Tray 1

·Tray 2

·Tray 3

·Tray 4*

·Tray 5.

NNote: If tray 4 is not installed, tray 1 becomes the default tray.

Automatic Tray Switching

The Automatic Tray Switching option determines if fax jobs feeding from a given tray switch to another tray of the same size when the first tray runs out of paper.

Settings include:

·Enable*

Allows fax jobs to switch to other trays containing the same paper size as the tray that is out of paper.

·Disable

Does not allow fax jobs to switch to other trays once the initial tray is out of paper.

4-6 XEROX MRP FAMILY FAX MODEM FOR MS-DOS OPERATOR GUIDE