Zenith C27H26B, S2898A Connections to other equipment, To connect the TV to a VCR, Rear of the TV

Models: 206-3923 C27H26B S2898A

1 34
Download 34 pages 46.86 Kb
Page 10
Image 10
Connections to other equipment

Connections to other equipment

The exact arrangement you use to interconnect various video and audio components to the TV is dependent on the model and features of each component. Check the Owner’s Manual provided with each component for the location of video and audio inputs and outputs.

The connection diagrams below are offered as suggestions. You may need to modify them to accommodate your particular assortment of components. The diagrams are intended to show component video and audio interconnections only.

To connect the TV to a VCR

To AUDIO/VIDEO OUT

AUDIO/VIDEO cord (not supplied)

To AUDIO/VIDEO IN

Rear of the TV

To connect the TV to a VCR with an S-Video cord

If you connect a VCR with a S-VIDEO cord to the S-VIDEO IN jack on the rear of the TV, you must also connect the audio cords to the AUDIO IN jacks on the rear of the TV. The S-VIDEO cord only carries the video signal. The audio signal is separate.

To S-VIDEO OUT

To connect the TV to a VCRRear of the TV To AUDIO OUT

To AUDIO IN

AUDIO cord (not supplied)

S-VIDEO cord (not supplied)

To S-VIDEO IN

Rear of the TV

 

NOTE:

When the S-video cord and the video cord are connected to each jack at the same time, the S-video cord takes precedence over the video cord.

To connect the TV to a DVD player/Satellite receiver

If your DVD player or Satellite receiver has a S-Video out jack, connect cords as shown.

To S-VIDEO OUT

To AUDIO OUT

To AUDIO IN

AUDIO cord (not supplied)

S-VIDEO cord (not supplied)

To S-VIDEO IN

Rear of the TV

10

Page 10
Image 10
Zenith C27H26B, S2898A Connections to other equipment, To connect the TV to a VCR with an S-Video cord, Rear of the TV