Zenith 206-3923, S2898A warranty Antenna connections, Connect the 75 ohm Cable from the Combination

Antenna connections

If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna system. If you are using a cable TV service (CABLE), see page 9 for Cable TV connections.

Combination VHF/UHF Antenna (Single 75 ohm Cable or 300 ohm Twin-lead Wire)

	Connect the 75 ohm Cable from the Combination
RF IN jack	VHF/UHF Antenna to the RF IN Jack.
	RF IN jack
	If your Combination VHF/UHF Antenna has a 300
	ohm Twin-lead Wire, the use of the 300-75 ohm
75 ohm	Matching Transformer may be necessary.
Coaxial Cable
	300-75 ohm
	Matching Transformer

Combination VHF/UHF Antenna (Separate VHF and UHF 300 ohm Twin-lead Wires)

RF IN jack	300-75 ohm
	Matching Transformer

Connect the UHF 300 ohm Twin-lead Wire to the Combiner (not supplied). Connect the VHF 300 ohm Twin-lead Wire to the 300-75 ohm Matching Transformer. Attach the Transformer to the Combiner, then attach the Combiner to the RF IN Jack.

Combiner

UHF 300 ohm

VHF 300 ohm

Separate VHF/UHF Antennas (75 ohm VHF Cable and 300 ohm UHF Twin-lead Wires)

RF IN jack

Connect the VHF 75 ohm cable and UHF 300 ohm Twin-lead Wire to the Combiner. Attach the Combiner to the RF IN Jack.

VHF 75 ohm

Combiner

UHF 300 ohm

8