Zenith XBV323 warranty Function OSD, Language Select, Audio Mode, Broadcast Type STEREO/SAP/MONO

Before VCR Operation (Continued)

Setting the VCR Setup Menu Options Channel Selection

1	Press MENU and the MAIN menu will appear.
2	Use v/V to select the SETUP menu, then press
	SELECT/ENTER.

The SETUP menu will appear.

This DVD+VCR is equipped with a frequency synthesized tuner capable of receiving up to 181 channels. These include VHF channels 2-13, UHF channels 14-69 and CATV channels 1-125.

Preparation:

Connect the DVD+VCR to the desired type of antenna or cable TV system, as shown in Connecting Antenna/Cable TV to DVD+VCR on page 11.

PREPARATION

3 Use v/V to choose a desired option on the SETUP menu. Then use b/B to choose a desired setting.

FUNCTION OSD

The on-screen display of this DVD+VCR can be turned on or off. FUNCTION OSD can be switched between ON and OFF by using b/B.

LANGUAGE SELECT

The on-screen programming of this DVD+VCR can be displayed in either English, Spanish, or French.

LANGUAGE SELECT can be switched among ENGLISH, SPANISH and FRENCH by using b/B.

AUDIO MODE

The DVD+VCR has two separate audio playback systems, the high quality VHS Hi-Fi system and standard NORMAL mono system. The same audio is generally recorded on both systems. The VHS Hi-Fi system plays on separate (left and right) channels, and the NORMAL system plays monaural sound. The normal track is always played so the cassette can be played on a DVD+VCR that does not have VHS Hi-Fi.

AUDIO MODE can be switched between HI-FI and NORMAL by using b/B.

BROADCAST TYPE (STEREO/SAP/MONO)

Multichannel Television Sound (MTS) carries stereo and/or Second Audio Program (SAP) bilingual signals. Set this display to the desired position when both MTS stereo and SAP signals are received. When only one of the MTS signal is received, the DVD+VCR automatically selects the corresponding receiving mode (Stereo or SAP) regardless of the selected position. For normal operation, the display should be in the STEREO position. The DVD+VCR will then record a STEREO program when available, and record a mono program IF the program is NOT IN STEREO. For weak STEREO and/or SAP broadcasts, changing the dis- play to mono may give clearer sound.

BROADCAST TYPE can be switched among STEREO, SAP, and MONO by using b/B.

AUDIO OUTPUT (STEREO/LEFT/RIGHT)

Used during playback [when AUDIO MODE (HI-FI/NORMAL) is in HI-FI position] for selecting the audio output signals from the AUDIO OUT terminals (L ch and R ch), and RF.OUT.

This display setting should normally be left in the stereo posi- tion, so that when a stereo tape is played, the stereo sound will be heard through the left and right channels. If a mono tape is played and the audio output is set to stereo, the same mono sound will be heard from both left and right channels.

AUDIO OUTPUT can be switched among STEREO, LEFT, and RIGHT by using b/B.

4 Press MENU when finished.

AUTO CHANNEL PROGRAMMING

1	Press MENU and the MAIN menu will appear.
2	Use v/V to select the TUNING menu, then press
	SELECT/ENTER.

The TUNING menu will appear.

3 Use V to choose the SOURCE SELECT option, then use b/B to select TUNER.

Press b/B repeatedly to switch between TUNER, LINE1 and LINE2.

4 Use v/V to choose the AUTO CHANNEL SET option, then use b/B to set the channel.

The tuner will automatically cycle through all available channels in the area and place them in the tuner’s memory.

5 After the AUTO CHANNEL SET has found all the available channels, set the TUNING BAND on the Tuning Menu, Choose TV or CATV using the b/B arrows.

6 Press MENU to return to the TV screen.

7	Use v/V or CH (v/V) on the front panel to cycle
	the DVD+VCR through the channels in memory.

TO ADD OR ERASE CHANNELS FROM MEMORY

This feature allows you to add or erase channels from memory manually.

1Press V to choose the CH. ADD/DEL option on the TUNING menu. Using b/B to select a channel to add or erase.

2Press SELECT/ENTER to add or erase the channel. Repeat steps 1 and 2 to add or erase channels.

3Press MENU to return to the TV screen.

15