Zenith Z52SZ80 warranty External A/V Source Setup, DVD Setup, How to connect, How to use

Installation

External A/V Source Setup

How to connect

Connect the audio and video cables from the external equip- ment's output jacks to the TV input jacks, as shown in the figure.

When connecting the TV to external equipment, match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red).

How to use

1.Select the input source by using the TV/VIDEO button on the Remote Control. Note that this TV finds the connected input sources automatically for Video 1-2 and Component 1-

2.It is presumed that RGB, HDMI1/DVI and HDMI2 sources are connected.

2.Operate the corresponding external equipment.

RGB INPUT

PC/DTV

(XGA/

480p/

720p/

1080i)

RGB/DVI INPUT

(L)

AUDIO

(R)

VARIABLE

AUDIO OUT

(L)

AUDIO

(R)

S-VIDEO

MONITOR INPUT2 INPUT1

OUT

VIDEO

VIDEO

(L)(L)

MONO AUDIO

(R)(R)

Camcorder

Video Game

Set

R AUDIO L VIDEO

DVD Setup

How to connect

1.Connect the DVD video outputs (Y, PB, PR) to the COMPO- NENT (Y, PB, PR) INPUT jacks on the TV and connect the DVD audio outputs to the AUDIO INPUT jacks on the TV, as shown in the figure.

2.If your DVD only has an S-Video output jack, connect this to the S-VIDEO input on the TV and connect the DVD audio out-

puts to the AUDIO INPUT jacks on the TV, as shown in the fig- ure.

Note: If your DVD player does not have component video output, use S-Video.

How to use

1.Turn on the DVD player, insert a DVD.

2.Use the TV/VIDEO button on the Remote Control to select Component 1 or Component 2. (If connected to S-VIDEO, select the Video2 or Front Video external input source.)

3.Refer to the DVD player's manual for operating instructions.

DIGITAL AUDIO OPTICAL OUTPUT

DIGITAL AUDIO OPTICAL INPUT (COMPONENT2)

DIGITAL AUDIO OPTICAL INPUT (DVI)

H

D /

M DV

I

1 I

H D M I 2

UPGRADE

PORT

ANTENNA

CABLE

COMPONENT

INPUT2 INPUT1

Y

PB

PR

(L)

AUDIO

(R)

DTV/DVD INPUT

RGB INPUT

PC/DTV

(XGA/

480p/

720p/

1080i)

RGB/DVI INPUT

(L)

AUDIO

(R)

VARIABLE

AUDIO OUT

(L)

AUDIO

(R)

S-VIDEO

MONITOR INPUT2	INPUT1
	VIDEO
	(L)
MONO	AUDIO
	(R)

•Component Input ports

To get better picture quality, connect a DVD player to the component input ports as shown below.

or

B	R	(R) AUDIO (L)	DIGITAL AUDIO	S-VIDEO	(R) AUDIO (L)
			OPTICAL

Component ports	Y	PB	PR
on the TV
Video output ports	Y	Pb	Pr
	Y	B-Y	R-Y
on DVD player	Y	Cb	Cr
	Y	PB	PR

DVD

Notes:

•Digital Audio will not work for Component 1 input source.

•Digital Audio operation has priority if Digital Audio and AUDIO L/R are connected at the same time.

Owner’s Manual 13

Downloaded from www.Manualslib.com manuals search engine