Operation

■STOPPING ENGINE

1.Release the throttle lever and run the engine for a half minute.

2.Shift the ignition switch to the STOP position.

NOTE

•Except for an emergency, avoid stopping the engine while pulling the throttle lever.

■ADJUSTING IDLING SPEED

1.When the engine tends stop frequently at idling mode, turn the adjusting screw clockwise.

2.When the cutting head keeps rotating after releasing the trigger, turn the adjusting screw counter-clockwise.

NOTE

•Warm up the engine before adjusting the idling speed.

■LINE HEAD USAGE WARNING

1.Always wear eye protection such as safety goggles. Never lean over the rotating cutting head. Rocks or other debris could be thrown into eyes and face and cause serious personal injury.

2. Keep the debris guard attached in place at all times when the unit is operated.

TRIMMING GRASS AND WEEDS

•Always remember that the TIP of the line does cutting. You will achieve better results by not crowding the line into the cutting area. Allow the unit to trim at its own pace.

1.Hold the unit so the head is off the ground and is tilted about 20 degrees toward the sweep direction.

2.Use full throttle when cutting.

3.You can avoid thrown debris by sweeping from your left to the right.

4.Use a slow, deliberate action to cut heavy growth. The rate of cutting motion will depend on the material being cut. Heavy growth will require slower action than will light growth.

5.Never swing the unit so hard as you are in danger of losing your balance or control of the unit.

6.Try to control the cutting motion with the hip rather than placing the full workload on the arm and hands.

7.Take precautions to avoid wire, grass and dead, dry, long-stem weeds from wrapping around the head shaft. Such materials can stall the head and cause the clutch to slip, resulting in damage to the clutch system if repeated frequently.

ADJUSTING THE LINE LENGTH

•Your brushcutters is equipped with a semi- auto type nylon line head that allows the operator to advance the line without stopping the engine. When the line becomes short, lightly tap the head on the ground while running the engine at full throttle.

•Each time the head is bumped, the line advance about 1 inch(25.4 mm). For better effect, tap the head on bear ground or hard soil. Avoid bumping in thick, tall grass as the engine may stall by overload.

16

Page 15 Page 17
Page 16
Image 16
Zenoah BC4401DW manual  16 
Page 15 Page 17

BC4401DW specifications

The Zenoah BC4401DW is a robust and versatile power tool designed primarily for professional landscapers and garden maintenance enthusiasts. This brushcutter stands out in a crowded market thanks to its combination of power, efficiency, and user-friendly features. As part of the Zenoah family, the BC4401DW is built with high-quality materials and engineering, ensuring durability and performance in various terrains.

One of the main features of the BC4401DW is its powerful engine. The model is equipped with a 44cc, two-stroke engine that delivers impressive torque and speed, making it highly effective for cutting through thick grass, weeds, and brush. This engine is designed for efficiency, ensuring that users can complete their tasks without frequent refueling and downtime.

Another notable technology integrated into the BC4401DW is the Easy Start system, which significantly reduces the effort required to start the machine. The advanced ignition system ensures reliable starts, even in cold weather. This is particularly advantageous for professional landscapers who need to rely on their equipment in various conditions.

The BC4401DW also boasts an ergonomic design that enhances user comfort and control. Its lightweight construction allows for extended periods of use without causing undue fatigue. The adjustable handle provides additional comfort, allowing users to tailor the grip to their preference, which is especially beneficial during long working sessions.

Safety features are also a priority in the design of the BC4401DW. It includes a protective guard to shield the user from debris and a throttle lock to prevent accidental activation. These safety measures offer peace of mind while operating the machine in demanding environments.

In terms of attachments, the BC4401DW is highly versatile. It supports a range of cutting heads, including nylon line and metal blades, allowing users to switch between tasks effortlessly. This adaptability makes it suitable for everything from trimming grass to clearing heavier brush.

Overall, the Zenoah BC4401DW is a powerful and efficient brushcutter that combines advanced technology with user-friendly features. Its powerful engine, ergonomic design, and versatility make it an excellent choice for professionals and gardening enthusiasts alike. Whether tackling residential yards or commercial landscaping projects, the BC4401DW delivers exceptional performance and reliability.
Top Page Image Contents