OPT10

English

12. Optional blade usage

3.How you can maintain the best control:

a.Keep a good, firm grip on the unit with both hands. A firm grip can help neutralize bounce. Keep your right and left hands completely around the respective handles.

b.Keep both feet spread apart in a comfortable stance and yet braced for the possibility that the unit could bounce. Do not overreach. Keep firm footing and balance.

MAINTENANCE BLADE

• Check the blade and the fasteners for looseness, cracking, or bending.

• Check the cutting edges and reform with a flat file.

(A)22, 24-tooth blade

(B)8-tooth blade

(C)4-tooth blade

Point (OPT10) :

1.Keep the end corner sharp.

2.Round the root of the edge, using round file.

3.Do not use water when using a grinder.

IMPORTANT

It is recommended that filing should be done by professionals.

Especially regarding filing the 22,24-tooth blade, Leave it to the professionals.

TRANSPORTING THE UNIT

When you finish cutting in one location and wish to continue work in another spot, turn off the engine, and lift up the unit and carry it paying attention for the blade.

Never forget to place the protective cover over the blades.

When transporting the unit over long distances, detach the blade fix the unit by ropes.

52

Page 52
Image 52
Zenoah BCZ3001S-CA, BCZ3001SW manual OPT10, How you can maintain the best control, Maintenance Blade, Transporting the Unit