SE5
SE6
4. SET UP
try inserting it again.
•Once the liner has been inserted, pull on the liner to make sure that the stopper is properly engaged.
■ATTACHING THE THROTTLE CABLE
WARNING
After fitting the wire, check if the wire sleeve is correctly fitted to the wire stopper. It is dangerous if the wire sleeve is out of the wire stopper because the engine speed will not decrease even if the throttle lever is released.
•Align the throttle cable along with the liner and tie it with band. (SE5)
(1)Band
(2)Throttle cable
(3)Tie loosely
1.Hook the cable and into the hole of the throttle lever. And set the cable in the lever as shown in the picture. (SE6)
2.Attach the lever as shown in the picture and screw it securely. (SE6)
(1)Throttle lever
(2)Hole
(3)Throttle cable
(4)Screw
(5)Nut
10
