F22

F23

English

9. Maintenance

Air Gap:

0.40mm (0.35 ~ 0.45mm) 0.016" (0.014 ~ 0.017")

(1) Rotor (2) Ignition coil

SHOULDER STRAP

If the shoulder strap is damaged it may break during use, thus causing the product to fall and resulting in personal injury. Follow the instructions below to replace the shoulder strap with new one.

Pass the upper end of the strap through the hanger, making the FLAPPED SIDE OUTSIDE.

Put the end of the strap through the ring on the strap, and then push the ring toward the hanger as close as possible.

(1) Ring

WARNING

The flap on the end of the strap works as a stopper. Never install the strap with the flapped side inside, or the unit may fall from the operator, which could result in injury to the operator and/or damage to the unit.

IMPORTANT

Do not apply liquid type screw lock glue on screws or bolts used to fix plastics components. Adherence of this type of glue may cause cracks on plastics and end up with the breakage.

English

10. Storage

BEFORE STORING THE BLOWER:

1.Drain a fuel tank and push the primer bulb until it becomes empty of fuel.

2 .Remove the spark plug and drop a spoonful of 2- cycle oil into the cylider. Crank the engine several time and install the spark plug.

3.Store unit in a dry, dust free place, out of the reach of children.

English

11. Disposal

When disposing your machine, fuel or oil for the machine, be sure to allow your local regulations.

42

Page 42
Image 42
Zenoah EBZ100RH, EBZ100-CA manual Storage, Disposal, F22 F23, Shoulder Strap, Before Storing the Blower