Zenoah CHTZ7500 owner manual F5 F6, F7 CHTZ6000, Operation, English

English

5. OPERATION

F5

F6

(2)

F7 [CHTZ6000]

IMPORTANT

■RUNNING IN THE ENGINE During the first 20 working hours, do not use the hedge-trimmer at maximum power for long periods.

■ADJUSTING IDLING SPEED

•Before adjusting the carburetor, clean the air filter and warm up the engine. (F5)

•Idle screw is adjusted in order to ensure a good safety margin between idle running and clutch engagement. (F6)

(1) Air filter (2) Idle screw

WARNING

With the engine idling (3000 rpm), the blade should not rotate. We recommend that you have the dealer or an authorised mechanic carry out any carburetor adjustments.

■CUTTING WORK WARNING

•Weather conditions and altitude may effect carburation.

•Do not allow anyone to stay close to the hedge-trimmer while working or while adjusting the carburetor.

■HOW TO USE

HANDLE [CHTZ6000 only] (F7)

To reduce fatigue when trimming hedges, the handle can be swivelled through 90° to the left or right.

Do not press the throttle during this operation!

Proceed as follows:

1.Free the handle by pressing the locking lever.

2.Turn the handle until the locking lever clicks into place.

3.When the handle is locked in its new position, you can apply the throttle again.

(1)Handle

(2)Locking lever

15