18
6. Set upEnglish
■CONNECTING SWITCH WIRES
•Connect the switch wires between the engine and
the main unit. Pair the wires of the same color.
■INSTALLING HANDLE
•Mount the handle to the shaft tube and clamp it at a
location that is comfortable to you. (SE1)
(1)About 11 inches (28cm)
■INSTALLING DEBRIS GUARD
•Put the debris guard on the gear box, attach it with
the screws and hardware provided. (SE2)
■INSTALLING CUTTING HEAD (SE3)
1. While locking the gear shaft, by inserting the
supplied tool into the upper holder on the gear box,
loosen and remove the hexagon nut(left-handed)
2. Fit the line head assembly to the gear shaft over the
holders. Hand-tighten it securely.
You need not holder (B) and nut when installing the
cutting head.
IMPORTANT
(1)
SE1
SE2
SE3