INSTALLATION
12
STEP 13 | STEP 14 | ||
|
|
|
|
|
|
|
|
|
|
|
|
1. Reinstall electrical box cover.
1.Reinstall bottom splash shield by first fastening 3 rear screws, (do not tighten all the way).
STEP 15 | STEP 16 | ||
|
|
|
|
|
|
|
|
1.Next, fasten the 3 front screws and begin tightening all screws from rear to front.
1.Connect duct to opening, inspect and tape all joints with approved aluminum or duct tape.
STEP 17 | STEP 18 | ||
|
|
|
|
|
|
|
|
|
|
|
|
1. Turn on electrical supply or plug into receptacles.
1.On Cyclone & Whirlwind models, be sure to pull both grease tubes over its opening.