Zephyr AK6000, AK9800, AK2000 manual Installation, Requirements, Accessories

Models: AK9800 AK6000 AK2000

1 21
Download 21 pages 61.15 Kb
Page 10
Image 10
INSTALLATION

INSTALLATION

8

WARNING

Installation of this product is intended for qualified installers, service technicians, or persons with similar qualified background. DO NOT attempt to install this appliance yourself. Injury could result form installing the unit due to lack of appropriate electrical knowledge and technical background. Improper installation, adjustment, alteration, service or maintenance can cause injury or property damage and the warranty on the product automatically becomes void.

Installation of this product must conform with all local codes. All connections must be electrically grounded and ducting must be properly vented outside in accordance to codes. Never duct exhaust into attics, within walls, crawlspaces, garages, or anywhere inside the house which might cause grease fire. All duct joints must be properly inspected, taped and sealed.

Edges are exposed around the duct opening and once the bottom grease shield is removed. Be careful when handling the sharp edges. Wearing protective gloves and appropriate work clothing is recommended.

REQUIREMENTS

Duct Size

Tools

Hurricane- 6“ Vertical Duct Discharge

Whirlwind- 6“ Vertical Duct Discharge

Cyclone- 6“ Vertical Duct Discharge

3-1/4 x 10“ Vertical Duct Discharge

3-1/4 x 10“ Horizontal Rear

Discharge

Hand Drill with #2 philips

Flat head screwdriver to pry electrical knockout

3/4“ Wood Boring Bit

Jigsaw (if cabinet opening modification is

required)

Power Source

115W

ACCESSORIES

Hurricane & Whirlwind series

2

residue cups

2

‘L’ brackets (for direct wall mount

 

only)

4

screws for ‘L’ brackets

1

6“ starting collar

3

electrical wire connectors & screws

Cyclone series

2

residue cups

2

‘L’ brackets (for direct wall mount

 

only)

4

screws for ‘L’ brackets

1

6“ starting collar

3

electrical wire connectors & screws

1

Convertible transition collar

1

6“ collar cap

1

3-1/4 x 10“ starting collar (packaged

 

 

separately)

 

1

Back-splash

Check all accessories before installation, packaging also includes 1) Care, Maintenance and installation manual

2)Owner’s Warranty Registration Card 3) Serial number label adhered on top of box.

Page 10
Image 10
Zephyr AK6000, AK9800, AK2000 manual Installation, Requirements, Accessories