MOUNTING HEIGHTS
The range hood must be installed at a minimum height of 22 inches (56 cm) from the cooking surface. If a connecting duct work composed of two parts is used, the upper part must be placed outside the lower part. Do not connect the range hood duct to the same duct used to exhaust hot air or fumes from another appliance. Before pro- ceeding with the assembly instructions remove the decorative mesh filters so that the range hood is esier to handle.
MOUNTING TO THE WALL
1.Place the paper template included with your hood on the wall to determine
where to add the screws for mounting the hood.
Make sure that the line at the bottom of the template is aligned with the edge of the rear lower corner of the hood. Fig. 15
Min 22" - Max 34" |
36" |
Installation - Mounting the Range Hood
Note! Cut out holes for ducting if venting out the back. Drill holes for the power supply and the remote blower power supply (if required), using the measure- ments indicated in Fig. 16.
2.Lift the hood onto the (2 type D) screws and adjust to make sure the hood is level.
- 17 -
