www.zephyronline.com
Installation - Mounting the Range Hood
WARNING: In order to facilitate their connection, make sure that the power supply conduits are not obstructed by the hood.
3.When the hood has been adjusted tighten the screws to secure the hood in place.
4.Once the adjustment has been completed, fix the hood definitely using another (2 type D) screws.
NOTE: Screws must be fastened into wooden studs so wood blocking may be necessary. If using wall anchors make sure to check your local codes for suita- bility and type of anchors to use.
NOTE1: For the various installations use screws and screw anchors suited to the
type of wall (minimum screw size: 1/4" diameter x 2-3/4" length).
NOTE2: The following Duct Cover kits are available as acessories:
- 18 -