Rear Panel

SERIAL NO.

CONTROL IN DC IN

OUTPUT

INPUT

 

 

 

 

 

ZOOM CORPORATION

 

 

 

MODEL 1010 MADE IN JAPAN

 

(1) (2)(3)(4)

(1)
CONTROL IN jack

(3)

OUTPUT jack
This connector allows use of the optional foot pedal FP01Connects to the amplifier.
to control pedal wah or volume level.

 

 

 

 

(4)

INPUT jack

(2)

DC INPUT (AC adapter) jack
Connects to the guitar.

The supplied AC adapter is connected here. As long as the AC adapter is connected, the unit is turned on. There is no separate power switch.

Connections

SERIAL NO.

CONTROL IN DC IN

OUTPUT

INPUT

 

 

 

 

 

ZOOM CORPORATION

 

 

 

MODEL 1010 MADE IN JAPAN

 

 

(3)

1010

 

 

(4)

(1)

FP01

 

 

 

Guitar

 

 

(2)

AC outlet

 

 

 

 

 

AC adapter

 

Guitar amplifier

(1)Connect an electric guitar to the INPUT jack.(2)Connect a guitar amplifier to the OUTPUT jack.

HINT When monitoring the sound through an audio speaker, distortion effects may sound too weak. If this happens, choose a distortion color with amplifier simulation.

For details regarding distortion color, please refer to the table of effect types on page 9.

(3)To control volume or wah with the foot pedal FP01, connect the pedal to the CONTROL IN jack of the 1010.

For details regarding use of the foot pedal, please refer to page 6.(4)After all other connections are completed, plug in the supplied AC adapter.This activates the unit.

Make sure that power to connected equipment is turned

NOTE

off before plugging in or unplugging the AC adapter of the 1010.

2