Zoom 1204 25

EFFECT TYPES,

EFFECT PATTERNS,

EFFECT PARAMETERS

This chapter describes the various effect types, effect patterns, and effect parameters.

■ 24 ■

Contents

Page Major Features Organization of This Manual CONTENTS EFFECT TYPES, EFFECTPATTERNS, EFFECT PARAMETERS ••••••••••••••••••••••••••• IMPORTANT INFORMATION Troubleshooting Usage Precaution Specifications Safety Precautions Warnings Precautions Page Controls and Functions ■Rear Panel ZOOM STUDIO Connections ZOOM STUDIO ■Connection between electronic instrument and playback equipment ■Connection to send/return jacks of a mixer ■Connection between microphone and playback equipment ■Using two effects in parallel Rack Mount Page Operation States Mode Selection Functions Trying out the ■Adjusting an effect 1.Select the effect as described above 2.Select the pattern as described above 3.Use the MIX LEVEL control to adjust the balance between DRY and WET sound 4.Use the EQ LOW control to adjust the low-frequencyboost or cut ■Storing effect settings in memory 1.Adjust the effect as desired 2.Press the STORE key once. This activates the store function Use the 5.To carry out the store function, press the STORE key once more ■Switching between manual mode and memory mode Switching from manual mode to memory mode 1.Verify that the MODE indicator is lit 2.Press the MODE key on the front panel Switching from memory mode to manual mode ■Editing a stored setting The setting of the 1.Use the MODE key to select the memory mode MIDI control Recalling Factory Default Memory Settings MENO Page ■Category: REV (Reverb) Explanation of terms ■Category: MOD (Modulation) ■Category: SERI (Serial) ■Category: PARA (Parallel) ■Category: SFX (Special Effects) MEMO Page Troubleshooting Page Usage Precautions Page Specifications 1204 MIDI IMPLEMENTATION ZOOM CORPORATION