Symptom | Check | Remedy | |
|
|
| |
Stored settings are different | Was editing carried out in memory mode? | The effect settings called up in memory mode have | |
from established settings. |
| no relationship to the position of the controls on the | |
|
| front panel. If a setting was not edited, the original | |
|
| (stored) setting, not the current position of the | |
|
| control, is effective. Therefore the stored settings | |
|
| will not reflect the control positions. | |
| Was a setting made with MIDI control change | Settings made with MIDI control change messages | |
| messages? | are only temporary and do not result in actual setting | |
|
| changes. If the store function is carried out, the | |
|
| stored contents will be the same as the original | |
|
| settings in memory. | |
|
|
| |
Memory settings cannot be | Is the unit in manual mode? | Use the MODE key to switch to memory mode. | |
called up or memory |
|
| |
numbers cannot be | Is the unit in recall mode? | Press the CANCEL key to switch to memory mode. | |
changed. | |||
|
| ||
| Are effects switched off? | Press EFFECT key to turn effects on. | |
| Is the store function active? | Press the STORE key or CANCEL key to terminate | |
|
| the store function. | |
| Is the MIDI channel setting function active? | Press the MIDI key or CANCEL key to terminate | |
|
| the function. | |
|
|
|
Symptom | Check | Remedy |
|
|
|
Control via MIDI cannot be | Is the unit in manual mode? | Use the MODE key to switch to memory mode. |
carried out. |
|
|
| Is the unit in recall mode? | Press the CANCEL key to switch to memory mode. |
| Does the MIDI channel setting match the send | Set up the 1204 to receive the required channels, |
| channel? | using the MIDI channel setting function. |
| Are messages other than control change messages | Other MIDI messages such as "Note On," "System |
| and program change messages being sent? | Exclusive Data," "Start/Stop," "NRPN," etc. are |
|
| ignored. |
| Are program change numbers and control change | For information about numbers, refer to the MIDI |
| numbers correct? | implementation. |
| Is the store function active? | Press the STORE key or CANCEL key to terminate |
|
| the store function. |
| Is the MIDI channel setting function active? | Press the MIDI key or CANCEL key to terminate |
|
| the function. |
| Is the MIDI OUT jack of the other device | Make connections as described in "Connections." |
| connected correctly to the MID IN jack of the 1204? |
|
|
|
|
■ 32 ■