5 If you are using a computer with a wireless network card installed, access the network card’s software and verify that it is connected to the zoom network and that the signal
10
Double-click the Network Connections icon. Click the Wireless Network Connection icon.
Look at the details that appear on the left side of the screen. If the signal strength is low, try repositioning the antennas of the AP+4. You can also try moving the wireless devices closer to the AP+4. You should also verify that zoom is selected as the wireless network. If it is not, then you are connected to the wrong network.
b c d
If you are using Windows XP with built-in wireless access:
a On your Windows desktop, click the Start button, then click Control Panel.
4
a Make sure the associated LAN port LED on the AP+4 front panel is lit.
b Check the TCP/IP settings on the computer (see above, page 8).
c Perform a Release/Renew operation on the computer, or reboot.
• If the wired computer CAN access the Internet, reboot the device(s) on your wireless network and try to access the Web again.
If you still cannot connect to the Internet wirelessly, go to Step 2.
2 Verify that security is not set on the AP+4. If it is, ensure that the wireless devices are using the same security settings.
3 Verify that the devices are connected to the correct wireless network and that the signal strength is adequate. (Try repositioning the devices if the signal strength is too low.)
If it cannot, try the following:
•
Verify that a “wired” computer can access the Internet.
1
Problem
I set up my AP+4 as an access point, but the devices I set up on my zoom wireless network cannot access the Internet.
Solution