At Wireless Operation, select

¾AP if you are using the AP+4 as a Router/Access Point or a Repeater.

¾Client if you are using the AP+4 as an Ethernet Client.

¾WDS in the unlikely event that you want to use the AP+4 as a repeater in WDS (Wireless Distribution System) mode.

¾AP+WDS in the unlikely event that you want the AP+4 to operate as both an Access Point and a repeater in WDS mode.

At Network Type (available only if the AP+4 is operating as a Client) select Infrastructure (most users) or Ad Hoc.

At SSID, enter the name of your wireless network. All wireless devices on your wireless network should use the same SSID. You may have already assigned one to another device, and in that case use the same SSID here. If you haven’t assigned one already, you can create a new SSID now. We suggest that you make it at least 8 letters and numbers and avoid a name that reveals your individual or company name or your street address. (The SSID is case-sensitive.)

At Channel Number (available only in the unlikely event that you selected Ad Hoc channel as your Network Type), select a channel number that isn’t being used by another nearby network. If you are unsure which channel to use, try Channel 6.

Select Enable MAC Clone in the unlikely event that you want to use the MAC address of a device in the network instead of the AP+4’s MAC address.

Enable Universal Repeater Mode (unavailable)

¾SSID of Extended Interface (unavailable)

Click Next to continue.

5