5 To have the AP+4’s clock automatically updated by an NTP server, on the Selecting a Time Zone page, select a Time Zone and an NTP Server, and click Next.
6 In the unlikely event that you need to set up or modify your wired local network, use the LAN Interface Setup page. Please see the instructions in the User Guide on the AP+4 CD.
7 To connect to the Internet, select the method on the Setting Up Internet Access page.
•The vast majority of users should select DHCP Client as the WAN Access Type.
•If you select DHCP Client and at the end of the installation process you have not connected successfully to the Internet, it is possible that you are running PPPoE software. In that case, at WAN Access Type select PPPoE
•If you are using the AP+4 as an Ethernet Client or a Repeater, at WAN Access Type you should also select DHCP Client unless you have requested a Static IP from your Internet Service Provider.
3