Zoom 5515 Light, Description

The table below defines these front panel lights and how to interpret them.

Light	Description
LAN	Lights when LAN connection is active.

RXD	Blinks when unit is transmitting or receiving data.

LINK	Blinks when unit is performing its startup sequence; stays on
	solid when unit is connected to the ADSL line.
PWR	Lights when power switch on back panel is turned on.

Appendix A: Front and Back Panel Data

Contents

ADSL Modem BRIDGE Page 1 INSTALLATION INSTRUCTIONS 2 SYSTEM ADMINISTRATION 3 REMOVING THE BRIDGE MODEM APPENDIX A: FRONT AND BACK PANEL DATA APPENDIX B: USING THE BRIDGE WITH PPPOE Installation Instructions 1.1 Important! Before You Begin 1.2 Package Contents You Will Also Need 1.3 Quick Start Instructions Connect the Bridge Using Phone Filters 1.4 If You Need Help System Administration 2.1 Monitoring System Status 2.2 Monitoring ADSL Status ADSL Line State Status SHOWTIME Advanced Setup 2.3Performing System Administration Tasks 2.4Resetting the Bridge to Its Default Settings 2.5 Updating the Bridge’s Firmware Removing the Bridge Modem Appendix A Front and Back Panel Data Back Panel Front Panel Light Appendix B Using the Bridge with PPPoE Appendix C Custom Installation Instructions Setting Up the Bridge Finish Changing the Windows TCP/IP Setting Changing the Macintosh TCP/IP Setting Duplicate Duplicate Configuration Zoom ADSL Modem Zoom ADSL Modem Connect via: Ethernet Configure: Manually Save Changing the Linux TCP/IP Setting Establishing Communication with the Bridge Completing the Installation dynamic IP address IP address Appendix D Regulatory Information U.S. FCC Part 68 Statement U.S. FCC Part 15 Emissions Statement Declaration of Conformity