d e

f

Turn your computer back on.

Turn the Bridge modem on by pushing the ON/OFF toggle switch. The PWR light on the unit’s front panel turns on.

The Bridge performs a startup sequence—the LINK light blinks. When the startup sequence is complete, the LINK light will change from blinking to solid, indicating the DSL connection is successful. (For reference, we have included a table on page 14 that explains the meaning of the front panel lights.)

Note: These TCP/IP instructions and screenshots are typical of a computer using Windows 2000 or XP; if you are using Windows 98 or Me, yours may differ slightly. If you are a Macintosh or Linux user, turn to page 20 or 23, respectively.

Changing the Windows TCP/IP Setting

1

Click Start Settings Control Panel and then double-click

 

the Network icon to display the Network dialog box.

 

Click the Configuration tab, highlight TCP/IP, and then

 

click Properties to display the TCP/IP Properties dialog

 

box.

2

Make sure you are at the IP Address tab. Click the button

 

Use the following IP address and enter these addresses:

Appendix C: Custom Installation Instructions

19