Tip: If the Network Password box doesn’t display, perform the following in this order:

 

a

Recheck all connections.

 

b

Restart the modem and computer.

 

c

Perform a “hard” reset. (See page 11.)

2

The Basic Setup page displays. You are now communicating

 

with your Bridge.

 

a

Change the VPI and VCI numbers so that they match

 

 

those given by your service provider.

 

b

Click Save Changes and Write Settings to Flash and

 

 

Reboot. Once the reboot is complete and the unit has

 

 

reset itself—when the front panel’s LINK light remains

 

 

on steady again—close the Zoom Web Console page.

 

c

Continue below with Completing the Installation.

 

 

 

 

 

 

 

 

REMEMBER:

Any time you make a change to the Basic Setup page, you must click the Save Changes button and then the Write Settings to Flash and Reboot button. A Confirm page displays; click the button to complete the process. If not, the change will be lost when you navigate to another page.

Completing the Installation

To complete the Bridge setup, you need to re-adjust your IP address, depending on your service provider.

Appendix C: Custom Installation Instructions

25